Aruba AP-120 Series Manual do Utilizador descarregar pdf (Página 2)

2 Aruba AP-120 Series Indoor Access Point | Installation Guide

Package Contents

z AP-120 series access point

z Installation guide (this document)

Before You Begin

WLAN Planning

Determine how many Aruba APs are needed for your wireless network deployment and where they will

be installed. You can easily accomplish this planning using Aruba’s automated RF Plan site-survey

software (available separately). This process is considered WLAN or RF planning and should have been

completed during the master Aruba Mobility Controller installation and configuration. In typical Aruba

installations, the mobility controllers are configured and installed before the APs.

For WLAN planning assistance, refer to the Indoor Access Points: Site Survey and Planning Pre-

Deployment Guide and the RF Plan Installation and User Guide.

Pre-Installation Network Requirements

After WLAN planning is complete and the appropriate products and their placement have been

determined, the Aruba Mobility Controller(s) must be installed and initial setup performed before the

Aruba Access Points are deployed.

For initial setup of the Mobility Controller, refer to the ArubaOS Quick Start Guide for the software

version installed on your controller.

Pre-Installation Checklist

Before installing your AP-120 series access point, be sure that you have the following:

z For the AP-120/AP-124: External antennas as specified in the network deployment plan

z CAT5 UTP cable of required length

z One of the following power sources:

 IEEE 802.3af-compliant Power over Ethernet (PoE) source

 Supports full functionality for AP-120/AP-121; supports reduced functionality for AP-124/AP-125

 IEEE Power Over Ethernet + (PoE+) source output at 56 Volts @ 350 mA

 The POE source can be any power source equipment (PSE) controller or midspan PSE device

 Aruba AP AC-DC adapter kit (sold separately)

z Aruba Mobility Controller provisioned on the network:

 Layer 2/3 network connectivity to your access point

 One of the following network services:

z Aruba Discovery Protocol (ADP)

NOTE

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the

carton, including the original packing materials. Use these materials to repack and return the unit to

the supplier if needed.

NOTE

Additional mounting kits for use with the AP-120 series access points are sold separately. Contact

your Aruba sales representative for details.

1 2 3 4 5 6 7 ... 11 12

Sem comentários

Aruba AP-120 Series Manual do Utilizador Página 2